Freshly Equipped Landcruiser 200

Jay, his wife & the kids will be set for their travelling adventures with their freshly Equipped Landcruiser 200 after a visit to us.

Here we see a colour coded ARB Summit winch compatible bullbar, matching coloured side steps & rails, Warn VR Evo synthetic rope winch, GME XRS connect UHF radio & a Redarc controlled dual battery installation. Jay supplied us with Stedi driving lights to install & wire up during the job.

This young family are planning to travel the country with their new caravan and now have the equipment to do so with ease.

Equipped Landcruiser 200

ARB Outback solutions modular drawers

Chris was happy with his new set of ARB Outback solutions modular drawers installed during the week.

Chris had a set of the Titan drawers installed prior and found they were just not up to the task. A quality upgrade here and a far superior product installed.

The ARB modular drawer system adds many benefits including loads of storage and good sturdy support for fridge slides and the like. Here we affixed Chris’s MSA fridge drop slide.

ARB offer drawers for most makes & models of 4wd in many different configurations.

Contact us today to discuss the options suited for you 44 726 360.

ARB Outback solutions modular drawers

One Mean Machine

Have a look at this beast. Fitted here are the following.

  1. ARB big tube steel bullbar
  2. ARB matching rails & steps
  3. Warn VR Evo synthetic rope winch
  4. Rhino Rack Tradie platform
  5. Safari Armax snorkel
  6. Hayman Reece towpack
  7. Bushranger 9” VLi LED driving lights
  8. Bushranger 28” VLi LED light bar on tradie platform
  9. 8 x Drivetech LED rear work lights
  10. Polaris in dash sat nav audio system with integrated reverse camera
  11. HPD catch can
  12. Speaker upgrade in all 4 doors with customers supplied speaker pods.
  13. Redarc controlled dual battery system
  14. Redarc Towpro electric brake controller
  15. Car builders insulation package added to internals of doors and rear of cab.

Also fitted here, supplied by the owner werea custom roof console, custom centre console & vinyl over carpet flooring.

This is one mean machine and ready to tackle anything.

one mean machine

Mazda BT50 Fit Out

Jon was happy with his new look Mazda BT50 after we fitted an ARB bull bar, ARB Ascent canopy, Bushranger 4x4 gear, winch and a cool set of Bushranger VLi 9” LED driving lights.

Another neat install by our team of fitters and another ARB/Bushranger equipped vehicle on the local roads.

mazda fitout 4x4

Ascent Canopy

The newest member to the ARB canopy family. Ascent is ARB’s feature packed flagship canopy, offering the highest level of usability and comfort in an ultra-premium design. With a raft of standard features including fully integrated central locking and push button window switches, Ascent is the solution for those who live an active lifestyle and want their vehicle to look just as good off road as it does in the parking lot.

Intensity Solis Lights

Filled with features, Intensity Solis driving lights are available in a Spot or Flood beam which come with interchangeable red and black die-cast side bezels. New to the Intensity range is the Solis’ 5-stage dimmability function, while the introduction of a highly tuned single-piece reflector and 165 watts of OSRAM LED performance bring it to the top of the class in light output.

Not just a remarkable performer, Intensity Solis driving lights represent a value proposition that is worth considering if you’re looking to add some additional driving lights to your vehicle.

LIGHT OUTPUT AND DIMMABILITY

The combination of 6x 10 watt and 30x 4-watt performance OSRAM LEDs with a highly tuned reflector design has brought the Intensity Solis to the top of the class in light output. 

Measured as a pair of spot beams, the Solis boasts 1 lux @ 1462 metres. Individually, a single flood beam will achieve 1 lux @ 729 metres while one spot beam has an impressive 1032 metres throw. 

Lights this bright need some level of containment, which is why Intensity Solis lights are sold standard with a 5-stage dimmability switch. 

ARB Base Rack

Fully-welded from extruded aluminium with a cross beam design, the BASE Rack has no requirement for a supporting subframe and exerts no flex under load. Each internal and perimeter beam is constructed from a single seamless extruded aluminium box piece with internal bracing for added strength.

The superior strength properties is what has allowed such close mounting to the vehicle’s roofline. 

The BASE Rack is manufactured from extruded aluminium beams. To further increase each beam’s rigidity, an additional aluminium bracing has been introduced which runs the entire length of each and every perimeter and internal cross-section.

Unique in design, the BASE Rack runs its beams horizontally instead of laterally, resulting in maximum strength and rigidity. Its strength omits the need of a sub-framing allowing the rack to sit lower for a sleeker finish.

Solid Fit out of a new LC200

It was really pleasing to hand over the keys to the owners of this new LC200 today after our dedicated team installed the following:

This was such a satisfying fit out and the owners Daniel & his wife were really impressed.

If you want to take your 4x4 to the next level then contact us today on 44 726 360.

LC200 fitout
Our dedicated team completd the fitout for this new LC200

East Coast Bull bar fitted

Here is something we don’t see very often in our shop but we were super excited to do an install on. A relatively new Mercedes Benz X Class with a new East Coast Bull bar fitted today in Textura black finish.

This was a first for us- challenging but achieved with confidence from our fitter Jamie. A great result and the vehicle will be back shortly for some super cool LED driving lights. East Coast Bull bars are an Australian company and manufactured in Australia.

Contact us today to enquire on a East Coast Bull bar (ECB) for your 4x4. 44 726 360.

east-coast-bullbar
Mercedes Benz X Class with a new East Coast Bull bar fitted.